Maxon WL7 Especificaciones descargar pdf (Pagina 27)

11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713

PATENTS PENDING

10. If adjustment is complete, tighten hex

nut (FIG.26-1B) and cap screw. If

required, repeat this procedure

starting from step 1.

11. Reinstall cover on tower (FIG. 26-1A).

HAND CONTROL

FIG. 27-1

UNFOLD

FOLD

DOWN

7. Position the Lift at floor level as in step 1.

8. Push FOLD on the Hand Control (FIG.

27-1). Controller reading should be

FOLD. (dot) as shown in FIG. 27-2.

NOTE: Watch the Controller readings

as the Platform starts folding.

CONTROLLER READING -

PLATFORM STARTS MOVING TO FOLD

FIG. 27-2

FOLD.

9. Before the roller on the Platform

Closer Arm touches the lower Parallel

Arm (FIG. 27-3), Controller reading

should change to FOLD (FIG. 27-4).

FOLD

CONTROLLER READING -

PLATFORM FOLDING

FIG. 27-4

LIFT WITH LH PUMP

(RH TOWER SHOWN)

FIG. 27-3

ROLLER

PLATFORM

CLOSER ARM

LOWER ARM

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 60 61

Sin comentarios

Maxon WL7 Especificaciones Pagina 27