Maxon MODMAX MM-6280IND Manual de usuario Pagina 72

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 306
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 71
Toolbox 32 User Manual 1.47d www.cse-semaphore.com/mykingfisher
Page
72
Ladder Logic - Maths
16-bit Register Range
0-65535 (unsigned) or -32768 to +32767 (signed). Values overflowing the storage limit are counted from
zero again. Eg. 65535 + 1 is stored as 0, 65535 + 2 is stored as 1. Values less than zero are counted
backwards from 0. Eg. -1 is stored as 65535, -2 is stored as 65534. All Kingfisher addresses (ie. #R, #AI,
#AO, #DI, #DO, #NR, #NA, #ND, #Y, #T) are 16-bit registers except for Floating point (#F) and Long (#L)
registers which are 32-bit registers and provide a greater numerical range.
Mixing Register Types
The Add, Subtract, Multiply and Divide maths blocks allow the 3 register types (16-bit, Float or Long) to be
used in any combination. If the destination register is a different type to either parameter, a type conversion
is used to obtain the result.
Increment
Increments the parameter by one. Eg. R1=R1+1. As used in the topic Example - Flow Totalisation.
Parameter: 16-bit register (read/write) or Long register (not Float)
Decrement
Decrements the parameter by one. Eg. R1=R1-1.
Parameter: 16-bit register (read/write) or Long register (not Float).
Add
Parameter 2 (R3) is added to Parameter 1 (R2) and the result is put in the Destination (R1). As used in the
topic Example - Flow Totalisation.
Destination: 16-bit register (read/write), Long or Float register.
Parameter 1, Parameter 2: 16-bit register (read/write), Long, Float or constant. Register types can be mixed
in any order.
Caution! It is possible to exceed the range of the destination register and produce an undefined result.
Vista de pagina 71
1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 305 306

Comentarios a estos manuales

Sin comentarios