Maxon WL7 Especificaciones descargar pdf (Pagina 22)

11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713

PATENTS PENDING

FOLD SWITCH & LOWERING SWITCH ADJUSTMENTS

1. Use the Backup Pump (FIG. 22-1)

to unfold the Platform to ﬂ oor level

(FIG. 22-2A).

2. Next use Backup Pump to position

the Lift for approximately 1” clearance

between big roller on the LH Closer

Arm and the LH Lower Parallel Arm

(FIGS. 22-2A and 22-2B).

1”

LH CLOSER ARM

BIG ROLLER CLEARANCE

FIG. 22-2B

BIG

ROLLER

LH LOWER

PARALLEL ARM

NOTE: Do this procedure if structure of the Lift is undamaged and:

• The Platform will not fold when empty.

• Inboard Rollstop is not landing correctly on the Threshold Plate when un-

folding Platform or raising Platform to ﬂ oor level.

• The FOLD switch or LOWERING switch are removed & replaced.

The adjustment is done correctly if:

• The Platform folds when empty.

• Inboard Rollstop rests on Threshold Plate and lines up approximately with

edge of Base Plate.

USING BACKUP PUMP TO UNFOLD

(LIFT WITH LH PUMP)

FIG. 22-1

RELEASE

VALVE

BACKUP PUMP

HANDLE

PLATFORM AT FLOOR LEVEL

(LH SIDE SHOWN)

FIG. 22-2A

NOTE: Controller can be turned off for

this part of the procedure. Use the

Backup Pump to position the Lift.

FOLD SWITCH “BALLPARK” ADJUSTMENT

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 86 87

Sin comentarios

Maxon WL7 Especificaciones Pagina 22