Maxon WL7 Especificaciones descargar pdf (Pagina 11)

11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713

PATENTS PENDING

CHECKING HYDRAULIC FLUID LEVEL

CAUTION

Keep dirt, water and other contaminants from entering the hydraulic sys-

tem. Before opening the hydraulic ﬂ uid reservoir ﬁ ller cap, drain plug and

hydraulic lines, wipe off contaminants that can get in the openings. Also,

protect the openings from accidental contamination.

2. If needed, add ﬂ uid to the reservoir

as follows. Unbolt the pump cover as

shown in FIG. 11-2.

1. Check the hydraulic ﬂ uid level in reservoir

as follows. With Lift in STOWED, ﬂ uid level

should be as shown in FIG. 11-1.

BOLTING ON THE PUMP COVER

(LH PUMP SHOWN)

FIG. 11-2

SCREWS

PUMP COVER

INSPECTION

SLOT

RESERVOIR

HYDRAULIC FLUID LEVEL

(LH PUMP SHOWN)

FIG. 11-1

2”

PUMP

COVER

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 90 91

Sin comentarios

Maxon WL7 Especificaciones Pagina 11