Maxon MODMAX MM-6280IND Información técnica descargar pdf (Pagina 66)

Extended AT Commands Manual Page 66 of 70 2009-06-25

14. CELLULAR EXTENDED AT COMMAND SET

AT command lines containing the command set specified start with “AT” and end with a carriage

return. Default configurations appear in boldface type.

14.1.1. Cellular AT parameter commands

Table 14.85 AT parameter commands

Command Description

Packet

Data

STUIII

+CDS

Um Interface Data Compression. This extended-format

compound parameter controls the V.42bis data

compression function on the Um interface. The command

format is the same as for the TIA/EIA/IS-131 +DS

command.

0,1,2048,6 (Default)

Range: (0-0),(1-1),(512-65535),(6-250)

N/A N/A

+CBC?

Battery Charge.

Read-only. Returns <BCS>,<BCL>

BCS: (S=source)

0: Response to BCS will always be 0 since MT2 cannot

discriminate between battery and other power supply

sources.

BCL: (L=level)

n.n: Current source level in Volts

O N/A

+CRC=<value>

Cellular Result Codes (see Table 4.4.2-1).

0: Disable Cellular Result Codes

1: Enable Cellular Result Codes

N/A N/A

+CFC=<value>

Um Interface Fax Compression.

0: No compression (Default)

Range not supported:

1: V.42bis compression with parameters as set by the

+CDS command

2: Modified Read compression

N/A N/A

1 2 ... 61 62 63 64 65 66 67 68 69 70

Sin comentarios

Maxon MODMAX MM-6280IND Información técnica Pagina 66