Maxon MODMAX MM-6280IND Información técnica descargar pdf (Pagina 68)

Extended AT Commands Manual Page 68 of 70 2009-06-25

14.1.3. Cellular result codes for Asynchronous data services

Table 14.87 Cellular result codes for Asynchronous data services

Result Code Description

Packet

Data

STUIII

+CRC=<value>

Cellular Result Codes

0: Disable Cellular Result Codes

1: Enable Cellular Result Codes

N/A N/A

+CERROR: BAD REQUEST Intercept received after call origination. N/A N/A

+CERROR: INIT FAILED

Initialization string failed. N/A N/A

+CERROR: LINK FAIL

Mobile station has declared a loss of the Traffic

Channel.

N/A N/A

+CERROR: NO SERVICE

Origination was attempted while the mobile

station was not able to monitor a Paging

Channel.

N/A N/A

+CERROR: NO <service

option> SERVICE

The indicated service option was rejected. The

<service option> shall be “ASYNC” or “FAX.”

N/A N/A

+CERROR: PAGE FAIL Mobile station received a page but not an alert. N/A N/A

+CERROR: PAGED

Mobile station attempted to originate after

receiving a page.

N/A N/A

+CERROR: RELEASE Indicates call release. N/A N/A

+CERROR: RETRY Reorder received after call origination. N/A N/A

+CPROG: ANSWER Indicates remote DCE has answered. N/A N/A

+CPROG: BONGTONE Billing Tone was detected. N/A N/A

+CPROG: DIALING

Indicates PSTN Dialling. N/A N/A

+CPROG: DIALTONE Dial tone was detected. N/A N/A

+CPROG: QUIET ANSWER Indicates Quiet Answer. N/A N/A

+CPROG: RINGING Indicates PSTN Ringing. N/A N/A

+CPROG: VOICE Voice detected on the PSTN connection. N/A N/A

RING <service option>

Specifies active service option. The <service

option> shall be “ASYNC”, “FAX” or “STU-III.”

N/A N/A

1 2 ... 63 64 65 66 67 68 69 70

Comentarios a estos manuales

Sin comentarios

Maxon MODMAX MM-6280IND Información técnica Pagina 68

Comentarios a estos manuales